Archive

Archive for the ‘TV Ceiling & Wall Mounts’ Category

VideoSecu Tilt LCD LED TV Wall Mount for most Sony Bravia, Samsung, LG, Haier, Panasonic, Vizio, Sharp AQUOS, Westinghouse, Pioneer, ProScan, RCA, Toshiba, Magnavox, Sanyo 32-65″ LCD LED Plasma HDTV Flat Panel Screen Display M80

March 27th, 2013 Comments off

Title : VideoSecu Tilt LCD LED TV Wall Mount for most Sony Bravia, Samsung, LG, Haier, Panasonic, Vizio, Sharp AQUOS, Westinghouse, Pioneer, ProScan, RCA, Toshiba, Magnavox, Sanyo 32-65″ LCD LED Plasma HDTV Flat Panel Screen Display M80
ASIN : B001L6EPCQ



The heavy duty steel mount is compatible with most LED, LCD, and Plasma TVs and other flat panel display between 32 and 65 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28″ apart horizontally and up to 17.7″ vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2″ profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28″ (710mm) horizontally and 17.7″ (450mm) vertically. Last, the mount plate width is 30″. Your TV should be at least 30 inch wide. Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo.


Consumer Review
works great for cheap
Easy to install and works the same as brackets priced twice as much. I went out on a limb to ‘buy cheap’ and was rewarded for once – why pay $75 for the same piece of metal just because it’s branded? This one works great.

Cheetah Mounts APSAMB 32-65″ LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt & Swivel Articulating Arm for Flat Screen Flat Panel LCD LED Plasma TV and Monitor Displays Includes Free 10′ Braided High Speed HDMI Cable With Ethernet

March 13th, 2013 Comments off

Title : Cheetah Mounts APSAMB 32-65″ LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt & Swivel Articulating Arm for Flat Screen Flat Panel LCD LED Plasma TV and Monitor Displays Includes Free 10′ Braided High Speed HDMI Cable With Ethernet
ASIN : B000WL0I1I

The APSAM universal articulating arm mount supports virtually any display up to 55-Inch with hole patterns up to 27.7-Inch horizontally and 19-Inch vertically. The APSAM also features a full 27-Inch of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5-Inch profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17-Inch wall plate which is specifically designed for installation to standard 16-Inch studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.
Does the job, but I’m disappointed with the end result
I just installed this wall mount for use with a 42″ Philips plasma screen TV. As you can see from the picture, the mount basically consists of two plates connected by an articulating arm, which provides the swivel action. The TV is secured to the larger of the two plates via the supplied brackets, which provide the tilt action. The mount itself comes pre-assembled and thus requires only installation onto the wall; similarly, the brackets are also pre-assembled (with the exception of a pair of adjustment knobs for the tilt mechanism which for some reason are not mentioned at all in the installation instructions), and need only be screwed into the back of the TV.

Despite some headaches presented by the construction of my wall (I rent an apartment in an old building in Brooklyn where there is apparently an inch-and-a-half of plaster overlying drywall and studs), I was able to install the smaller plate into the wall using some cheap-but-sturdy toggler anchors from the local…

Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket Designed for 32″-55″ Plasma LED LCD TV (Actually Fits 20-55″ TVs) Includes Free 10′ Braided High Speed HDMI Cable With Ethernet

March 5th, 2013 Comments off

Title : Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket Designed for 32″-55″ Plasma LED LCD TV (Actually Fits 20-55″ TVs) Includes Free 10′ Braided High Speed HDMI Cable With Ethernet
ASIN : B001GTTEBK

The APTMSB tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 32-55″ size range. Specifically, the APTMS supports hole patterns up to 15.75″ horizontally by 15.75″ vertically and VESA hole patterns up to 400x400mm. The APTMS is designed with a slim 1.9″ profile yet still offers up to 15° of forward tilt. The APTMS is constructed with 100% High Grade Steel providing a sturdy and reliable mount. The wall plate will support two stud installation for studs up to 16″ apart (most US homes have studs which are 16″ apart). The two arm brackets attach to the TV separate from the wall plate allowing for easy “Lift n Lock” installation. Each arm bracket includes a safety screw to prevent accidental liftoff. The wall plate includes a built in bubble level and a separate 6″ 3-Axis magnetic bubble level is provided as well. The paint is a high quality textured powder coat paint. The mount ships with all necessary mounting hardware and instructions.
Great for a 32 inch LCD
I receieved this product fast. I opened it up and was very pleased with all parts and HW in tact.
Set it up on my wall in a short time, and tilted it perfectly for viewing on my bed.
Very legit!! I am happy with the low low price and very sturdy construction.

VideoSecu Tilt TV Wall Mount for Most 37″- 70″ LCD LED Plasma TV Flat Screen with VESA 200×200 to 700x400mm, Sturdy Steel Wall Plate Free HDMI Cable and Bubble Level 3KR

February 3rd, 2013 Comments off

Title : VideoSecu Tilt TV Wall Mount for Most 37″- 70″ LCD LED Plasma TV Flat Screen with VESA 200×200 to 700x400mm, Sturdy Steel Wall Plate Free HDMI Cable and Bubble Level 3KR
ASIN : B000NMFCIA
List Price : $159.99
Price : $29.99
Saved Price : $130.00

The VideoSecu TV Mount is compatible with LED, LCD, and Plasma TVs and other flat panel display between 37 and 70 inches weigh less than 165lbs. Supports all VESA mounting standards 700×400, 684×300, 600×400, 600×300, 600×200, 500×300, 400×400, 400×300, 400×200, 300×300, 300×200, 200×200, 200×100 mm. Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2″ profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28″ (700mm) horizontally and 16″ (400mm) vertically. Last, the mount plate width is 32″. Your TV should be at least 37″. Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo.

category: TV Ceiling & Wall Mounts
brand: VideoSecu
Rating : 4.7

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3″ from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700×400 and 165lbs, Including 10′ Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level Review

January 29th, 2013 Comments off

Title : Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3″ from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700×400 and 165lbs, Including 10′ Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level
ASIN : B0012S4APK
List Price : $40.99
Price : $27.99
Saved Price : $13.00


category: TV Ceiling & Wall Mounts
brand: Cheetah
Rating : 4.4

The Flat Belly Blog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.