Archive

Posts Tagged ‘Jack’

OTC 1532 2-Ton Capacity Aluminum Racing Jack

March 26th, 2013 Comments off

Title : OTC 1532 2-Ton Capacity Aluminum Racing Jack
ASIN : B000XSCEBM



Aluminum Racing Jack that Lifts two tons and weighs only 43 pounds. Made from aircraft-grade aluminum and with dual pump pistons you reach the maximum height of 18 inch with only 5 pumps. Low profile 3-1/2 inch makes it perfect for ground hugging, high performance cars. Includes side-mounted handles for quick and easy carrying and the removable, rubber saddle pad protects vehicle and prevents slipping. The two-piece 45 inch long handle snaps together for quick and easy setup. Backed by OTC feets lifetime marathon warranty.

Stores easily with the OTC 552650 Wall Mount (sold separately)

The OTC 1532 Aluminum Racing Jack lifts two tons and weighs only 43 pounds. It’s constructed from aircraft-grade aluminum and features dual pump pistons that let you reach the maximum height of 18 inches with only 5 pumps. Its 3-1/2 inch low profile makes it perfect for ground hugging, high performance cars. This jack also includes side-mounted handles for quick and easy carrying, and the removable rubber saddle pad protects your vehicle and prevents slipping.

Racing Jack for a Fast, Powerful Lift

The OTC 1532 lifts two tons, with only five pumps to reach its maximum height. Its light weight of only 43 lbs. and incredibly low profile make it ideal for shops that work on lowered cars or trucks, racing machines, and tuners, giving you consistently fast and stable lifting power.

Aluminum Construction

Made from aircraft-grade aluminum, the OTC 1532′s two-piece, 45″ long handle snaps together for quick setup. The jack includes side-mounted handles for quick and easy carrying from vehicle to vehicle. A removable rubber saddle pad protects lifted vehicles and prevents slipping.



Consumer Review
Terrible Jack, Falsely advertised Warranty
This is one badly made jack combined with false advertising on their Lifetime warranty.

Jack came in quickly from amazon. Looked pretty. Made in China. I did the bleed routine but found the first 1/4th of the lever movement was flat spot/ free play, and didn’t do any actual lifting. I attributed this to a quirky jack and it didn’t bother me much especially due to the lifetime warranty. If it wasn’t for the warranty, it would’ve gone right back. Jack worked great otherwise though the force required was a good bit more than any other Jack I’ve had, even with the long lever. It was way more effort than the $100 Torin Race Jack sold here on amazon. The effort itself didnt bother me, but gave me the feeling that the leverage was wrong and the piston assembly was under undue stress. Kinda like it was trying to lift more than it should per stroke to aid quicker lifting. I could feel the lever bending, something Ive never experienced in any of the jacks Ive used before. All the…

Categories: Floor Jacks Tags: , , , , ,

Hi-Lift Jack HL485 48″ Hi-Lift Red All Cast Jack

March 6th, 2013 Comments off

Title : Hi-Lift Jack HL485 48″ Hi-Lift Red All Cast Jack
ASIN : B000688VNE

Hi-Lift Jacks are the only all-cast jacks manufactured in the world. The top winch connector clamp is supplied standard with all Hi Lift jacks and each jack is fitted with a safety shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
hi-lilft jack already payed for itself
I bought my hi-liftjack just for general jacking needs. I didn’t know that I would need it to lift a large tractor weight into the back of a trailer to take to a salvage yard. It worked perfectly though and then was used again to lift the trailer onto the hitch of my truck. Very useful and very easy to use. I would definetely by again.

Categories: All product Tags: , , ,

Hi-Lift Jack ORK Off-Road Kit

February 9th, 2013 Comments off

Title : Hi-Lift Jack ORK Off-Road Kit
ASIN : B00042KQ58
List Price : $94.39
Price : $65.76
Saved Price : $28.63

Hi-Lift Off-Road Kit is everything you need to winch with your Hi-Lift jack all in one convienent bag. Use this kit to turn your Hi-Lift jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms length.
GIVE ME A BREAK!!!!!!!!! Which just might happen!
Your life could depend on this kit, YIKES! I believe in over building anything I use. So what’s wrong with this kit. Only grade 43 chain, maybe, has an L4 stamp, 3/8″ hooks, which aren’t stamped with a grade rating at all, 5/8″ shackle(probably OK). I use grade 7 chain and 3/4″ shackles for my CJ7, weight, probably between 3700-4000lbs.
In assembling the winch tensioner, the hole is too far back in the casting to get the bolt thru. The width of the casting is too narrow to readily accept the chain link, didn’t allow for the weld on the link! After forcing the link into the casting, the second link is firm against the nose leaving a good 1/8″ to go to get the bolt in. I ground a small notch in the casting to allow the second link to seat itself a little deeper. Being as how you are going to be standing in line with the straps,chain,etc., the weakest link had better be the shear pin in the jack, ONLY!! You don’t want hooks, chain,etc. breaking under load, I don’t want to walk out…

Categories: Floor Jacks Tags: , ,

Hi-Lift Jack XT485 48″ Hi-Lift X-TREME Jack

February 8th, 2013 Comments off

Title : Hi-Lift Jack XT485 48″ Hi-Lift X-TREME Jack
ASIN : B0017T7WHW
List Price : $120.49
Price : $100.94
Saved Price : $19.55

The Hi-Lift X-treme is the top of the line all-cast jack that include the special features, charcoal metallic powder-coat finish, gold zinc-coated hardware and handle, and a special top winch-clamp-spreader attachment with 7/8 inch holes for easy/secure non-binding shackle attachment, a 3/8 inch chain slot for easy/secure winching and quick slack adjusment with no hook required and a cut-out wedge for gripping when spreading an object.
Great jack, but shame on Hi-Lift for its shipping
Simple, strong, brilliant design and what seems like an unstable base actually makes it easy on your equipment because the jack leans in to lift the load rather than pulling the load to it. It makes sense in action. It needs oiling right out of the box so don’t forget to do that. I use it to lift a big ZTR mower deck that weighs 750-lbs., so I inserted a half-inch bolt and nut where I start lifting on that mower to keep the large runner from dropping the last 13 inches when lowering the load. If you ever need any work done on it, keep your receipt, as Hi-Lift requires proof-of-purchase within its 1-year warranty.
_______________________
NOTE ON SHIPPING:
SHAME ON YOU, HI-LIFT, AND YOU KNOW WHAT I’M TALKING ABOUT. You shipped this great jack in a big box without any packing material via UPS and they took up your challenge. Both UPS and FedEx are notorious anymore for destroying more goods than they deliver, and without any packaging protection, UPS not only tore off half…

Categories: Uncategorized Tags: , , ,

Hi-Lift Jack LM-100 Lift-Mate Review

January 30th, 2013 Comments off

Title : Hi-Lift Jack LM-100 Lift-Mate
ASIN : B00042KGWG
List Price : $43.85
Price : $33.44
Saved Price : $10.41

Hi-Lift Lift-Mate lifts directly from the wheel. Many trucks and SU’s have larger tires and or lift kits that require extensive lifting height ability for the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.

category: Jack Stands
brand: Hi-Lift
Rating : 4.5

Categories: Jack Stands Tags: , , ,

Hi-Lift Jack HL484 48″ Hi-Lift Black Cast and Steel Jack Review

January 29th, 2013 Comments off

Title : Hi-Lift Jack HL484 48″ Hi-Lift Black Cast and Steel Jack
ASIN : B00042KG3A
List Price : $91.22
Price : $73.94
Saved Price : $17.28

Hi-Lift Cast and Steel Jacks have four stamped high-strength steel parts in combination with the cast parts. The top winch connector clamp is supplied standard with all Hi Lift jacks and each jack is fitted with a safety shear bolt which prevents the jack from being used on loads greater than 7000 pounds.

brand: Hi-Lift
Rating : 4.7

Categories: Uncategorized Tags: , , , , ,
The Flat Belly Blog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.